Surelock McGill -
Copyright
© 2010 Surelock McGill Limited. All rights reserved.
Website Designer | Thamesway
HOME | CONTACT US | SITE MAP
by Surelock McGill
Ask the locking technology experts, no sales pitch or obligation, just a clear answer to your question.
>> Click Here
experts
ask the
The Surelock McGill range of door vision panels are supplied in cassette form and meet the combined requirements of security, blast and ballistic protection. They are supplied in sizes that can provide compliance with the needs of the Disability Discrimination Act (DDA).
For full details of all our Ancillary Products
CLICK HERE
Vision Panels
Ordering code: Refer to table below
High performance glazed openings in security, fire, blast, ballistic and DDA
Technical information:
All dimensions are in mm
Vision Panel cassette assembly technique
* Refer to BS 8300:2001 extract ‘minimum zones of visibility’ supporting the ‘Disability Discrimination Act’ section 6.4.3 Vision Panels
Safety for the Disabled -
Extract from BS 8300:2001, supporting the ‘Disability Discrimination Act’ Section 6.4.3 Vision Panels
Entrance and lobby doors, other than those to dwellings should have viewing panels to alert people approaching a door to the presence of another person on the other side.
If a door has a single viewing panel, the minimum zone of visibility should be between 500mm and 1500mm from the floor.
If a door requires an intermediate horizontal section for strength or to accommodate door furniture, the door should have two viewing panels, one accommodating a zone of visibility between 500mm and 800mm from the floor and the other accommodating a zone of visibility between 1150mm and 1500mm from the floor (see figure 16).
COMMENTARY ON 6.4.3. This enables a person of small stature or a wheelchair user (when approaching a door) to see, and be seen by, another wheelchair user or an ambulant person approaching from the other side, while allowing the possibility of having an opaque area across the door to provide strength, or to accommodate door furniture.
NOTE 1 More than two vision panels may be provided, or may be larger than the zones of visibility, as long as the zones are accommodated within the glazing area.
NOTE 2 Vision panels may be less than the minimum size or omitted in doors to spaces that are required to be darkened for their function, e.g. cinemas and auditoria.
compliant doors